!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!%%%% %%%%
!%%%% NOTE: Before calling subroutines in this file, it is %%%%
!%%%% assumed that the program is in MPI multifile mode. %%%%
!%%%% If ncompressx = ncompressy = 1, the subroutines %%%%
!%%%% do not need to join smaller tiles, otherwiser, %%%%
!%%%% join smaller WRF tiles to get a local ARPS patch. %%%%
!%%%% %%%%
!%%%% All subroutines in this file do not have to %%%%
!%%%% support PHDF5 format because PHDF5 file does %%%%
!%%%% not in split files. %%%%
!%%%% %%%%
!%%%% All file IDs are size of (ncompressx,ncompressy) %%%%
!%%%% arrays, except the following attribute related %%%%
!%%%% subroutines: %%%%
!%%%% get_wrf_meta_from_multi_files %%%%
!%%%% get_dom_ti_integer %%%%
!%%%% get_dom_ti_real %%%%
!%%%% get_dom_ti_char %%%%
!%%%% %%%%
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE open_wrf_file ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE open_wrf_multi_files(filename,io_form,for_meta_only, &,11
ncompressx,ncompressy,nidout,istatus)
!
!------------------------------------------------------------------
!
! PURPOSE:
!
! Open a WRF file and return NetCDF file handler. Each processor
! may open multifiles depends on ncompressx/ncompressy. However,
! for_meta_only is .TRUE., only one file will be opened.
!
! This mode only supports binary and NetCDF format so far.
!
! NOTE: it is required to call close_wrf_multi_files explicitly to close
! the opened file in your calling program.
!
!------------------------------------------------------------------
IMPLICIT NONE
CHARACTER(LEN=*), INTENT(IN) :: filename
INTEGER, INTENT(IN) :: io_form
LOGICAL, INTENT(IN) :: for_meta_only
INTEGER, INTENT(IN) :: ncompressx, ncompressy
INTEGER, INTENT(OUT) :: nidout(ncompressx,ncompressy)
INTEGER, INTENT(OUT) :: istatus
!------------------------------------------------------------------
!
! Misc. local variable
!
!------------------------------------------------------------------
CHARACTER(LEN=256), ALLOCATABLE :: tmpstr(:,:)
LOGICAL :: fexists
CHARACTER(LEN=80) :: sysdepinfo
LOGICAL, SAVE :: initialized = .FALSE.
INCLUDE 'mp.inc'
INTEGER :: loc_proc, iloc, jloc
INTEGER :: iloc_x, jloc_y, nprocx_in
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Begining of executable code
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
istatus = 0
iloc_x = (loc_x-1)*ncompressx ! column of processors
jloc_y = (loc_y-1)*ncompressy ! rows of processors
nprocx_in = ncompressx*nproc_x
ALLOCATE(tmpstr(ncompressx,ncompressy), STAT = istatus)
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
loc_proc = (jloc_y+jloc-1)*nprocx_in + iloc_x+(iloc-1)
WRITE(tmpstr(iloc,jloc),'(a,a,I4.4)') filename,'_',loc_proc
INQUIRE(FILE = TRIM(tmpstr(iloc,jloc)), EXIST = fexists)
IF ( .NOT. fexists ) THEN
WRITE(6,'(3a)') 'File not found: ',tmpstr(iloc,jloc),' in open_wrf_file'
CALL arpsstop
('WRF file not exist.',1)
ENDIF
END DO
END DO
sysdepinfo = 'DATASET=HISTORY'
nidout(:,:) = -1
IF (io_form == 7) THEN ! not initialize needed
IF ( for_meta_only ) THEN
CALL open_ncd_file(tmpstr(1,1),nidout(1,1))
IF (istatus /= 0) THEN
WRITE(0,'(1x,2a)') 'ERROR: Opening file ',tmpstr(1,1)
CALL arpsstop('Open WRF file error.',1)
END IF
ELSE
DO jloc = 1,ncompressy
DO iloc = 1,ncompressx
CALL open_ncd_file(tmpstr(iloc,jloc),nidout(iloc,jloc))
IF (istatus /= 0) THEN
WRITE(0,'(1x,2a)') 'ERROR: Opening file ',tmpstr(iloc,jloc)
CALL arpsstop('Open WRF file error.',1)
END IF
END DO
END DO
END IF
ELSE IF (io_form == 1) THEN ! initialize explicitly
IF (.NOT. initialized) CALL ext_int_ioinit( SysDepInfo, iStatus )
IF ( for_meta_only ) THEN
CALL ext_int_open_for_read (tmpstr(1,1), 0, 0, SysDepInfo, &
nidout(1,1), iStatus )
IF (istatus /= 0) THEN
WRITE(0,'(1x,2a)') 'ERROR: Opening file ',tmpstr(1,1)
CALL arpsstop('Open WRF file error.',1)
END IF
ELSE
DO jloc = 1,ncompressy
DO iloc = 1,ncompressx
CALL ext_int_open_for_read(tmpstr(iloc,jloc),0,0, SysDepInfo, &
nidout(iloc,jloc),iStatus )
IF (istatus /= 0) THEN
WRITE(0,'(1x,2a)') 'ERROR: Opening file ',tmpstr(iloc,jloc)
CALL arpsstop('Open WRF file error.',1)
END IF
END DO
END DO
END IF
ELSE
WRITE(0,*) 'Unsupported IO format - ',io_form
CAlL arpsstop('Unsupported IO format.',1)
END IF
initialized = .TRUE.
DEALLOCATE(tmpstr)
RETURN
END SUBROUTINE open_wrf_multi_files
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE close_wrf_file ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE close_wrf_multi_files(nch,io_form,for_meta_only, &,5
ncompressx,ncompressy,istatus)
!
!------------------------------------------------------------------
!
! PURPOSE:
!
! Close the WRF file which is opened using open_wrf_multi_file.
!
!------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: io_form
LOGICAL, INTENT(IN) :: for_meta_only
INTEGER, INTENT(IN) :: ncompressx, ncompressy
INTEGER, INTENT(IN) :: nch(ncompressx,ncompressy)
INTEGER, INTENT(OUT):: istatus
!------------------------------------------------------------------
!
! Misc. local variable
!
!------------------------------------------------------------------
!
INTEGER :: iloc, jloc
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
istatus = 0
IF(io_form == 7) THEN
IF (for_meta_only) THEN
CALL close_ncd_file(nch(1,1))
ELSE
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
CALL close_ncd_file(nch(iloc,jloc))
END DO
END DO
END IF
ELSE IF (io_form == 1) THEN
IF (for_meta_only) THEN
CALL ext_int_ioclose(nch(1,1),iStatus)
ELSE
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
CALL ext_int_ioclose(nch(iloc,jloc),iStatus)
END DO
END DO
END IF
END IF
IF (istatus /= 0) THEN
WRITE(0,'(1x,2a)') 'ERROR: closing file handler ',nch
CALL arpsstop('Error in close_wrf_multi_files',1)
END IF
RETURN
END SUBROUTINE close_wrf_multi_files
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE get_wrf_Times ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE get_wrf_Times_from_multi_files(nfid,io_form,ncompressx, &,2
ncompressy,itime,timestr,istatus)
!
!-----------------------------------------------------------------------
!
! PURPOSE:
! Read the the Date String in the WRF outputs at specified time.
!
! Although the first file only will provide enough information, we
! have to read through all of the files because the sequencial
! access requirement of WRF binary file. However, only the last
! read timestr will be returned.
!
!-----------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: ncompressx, ncompressy
INTEGER, INTENT(IN) :: nfid(ncompressx,ncompressy) ! file handler
INTEGER, INTENT(IN) :: io_form ! File format
INTEGER, INTENT(IN) :: itime ! Time dimension value
! this is the unlimited dimension
CHARACTER(LEN=*), INTENT(OUT) :: timestr
INTEGER, INTENT(OUT) :: istatus
!------------------------------------------------------------------
!
! Misc. local variables
!
!------------------------------------------------------------------
INTEGER :: iloc, jloc
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF (io_form == 7) THEN ! Read the first file only
CALL get_ncd_next_time(nfid(1,1),itime,timestr,istatus)
ELSE IF (io_form == 1) THEN ! Read through all files. Actually, only
! the last file return valid value.
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
CALL ext_int_get_next_time(nfid(iloc,jloc),timestr,istatus)
END DO
END DO
END IF
RETURN
END SUBROUTINE get_wrf_Times_from_multi_files
!
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE get_wrf_metadata ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE get_wrf_meta_from_multi_files(nid,io_form,dim_check, &,48
nx_ext,ny_ext,nz_ext,nzsoil_ext, &
iproj,trlat1,trlat2,trlon,ctrlat,ctrlon, &
dx,dy,dt,sfcphys,mpphys,istatus)
!-----------------------------------------------------------------------
!
! PURPOSE
!
! Retieve WRF grib information from the NetCDF file which are stored
! as Global attributes. Only 1 file ID is enough.
!
!-----------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: nid
INTEGER, INTENT(IN) :: io_form
LOGICAL, INTENT(IN) :: dim_check
INTEGER, INTENT(OUT) :: nx_ext, ny_ext ! they are whole domain dimensions
INTEGER, INTENT(OUT) :: nz_ext, nzsoil_ext
INTEGER, INTENT(OUT) :: iproj
REAL, INTENT(OUT) :: trlat1
REAL, INTENT(OUT) :: trlat2
REAL, INTENT(OUT) :: trlon
REAL, INTENT(OUT) :: ctrlat
REAL, INTENT(OUT) :: ctrlon
REAL, INTENT(OUT) :: dx
REAL, INTENT(OUT) :: dy
REAL, INTENT(OUT) :: dt
INTEGER, INTENT(OUT) :: sfcphys
INTEGER, INTENT(OUT) :: mpphys
INTEGER, INTENT(OUT) :: istatus
!-----------------------------------------------------------------------
!
! Misc. local variable
!
!-----------------------------------------------------------------------
INTEGER :: ips, ipe, jps, jpe
INTEGER :: ips_u,ipe_u,jps_u,jpe_u
CHARACTER(LEN=80) :: cdump
INTEGER :: idump
REAL :: rdump
INTEGER :: ilocd, jlocd
INTEGER :: ilocs, iloce, jlocs, jloce
INCLUDE 'mp.inc'
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
CALL get_dom_ti_char(nid,io_form,'TITLE', cdump,istatus)
CALL get_dom_ti_char(nid,io_form,'START_DATE',cdump,istatus)
CALL get_dom_ti_integer(nid,io_form,'WEST-EAST_GRID_DIMENSION', nx_ext,istatus)
CALL get_dom_ti_integer(nid,io_form,'SOUTH-NORTH_GRID_DIMENSION',ny_ext,istatus)
CALL get_dom_ti_integer(nid,io_form,'BOTTOM-TOP_GRID_DIMENSION', nz_ext,istatus)
CALL get_dom_ti_char (nid,io_form,'GRIDTYPE',cdump,istatus)
CALL get_dom_ti_integer(nid,io_form,'DYN_OPT', idump,istatus)
CALL get_dom_ti_integer(nid,io_form,'DIFF_OPT',idump,istatus)
CALL get_dom_ti_integer(nid,io_form,'KM_OPT', idump,istatus)
CALL get_dom_ti_integer(nid,io_form,'DAMP_OPT',idump,istatus)
CALL get_dom_ti_real (nid,io_form,'KHDIF', rdump,istatus)
CALL get_dom_ti_real (nid,io_form,'KVDIF', rdump,istatus)
CALL get_dom_ti_integer(nid,io_form,'MP_PHYSICS', mpphys, istatus)
CALL get_dom_ti_integer(nid,io_form,'RA_LW_PHYSICS', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'RA_SW_PHYSICS', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'SF_SFCLAY_PHYSICS', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'SF_SURFACE_PHYSICS',sfcphys,istatus)
CALL get_dom_ti_integer(nid,io_form,'BL_PBL_PHYSICS', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'CU_PHYSICS', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'WEST-EAST_PATCH_START_UNSTAG', ips_u, istatus)
CALL get_dom_ti_integer(nid,io_form,'WEST-EAST_PATCH_END_UNSTAG', ipe_u, istatus)
CALL get_dom_ti_integer(nid,io_form,'WEST-EAST_PATCH_START_STAG', ips, istatus)
CALL get_dom_ti_integer(nid,io_form,'WEST-EAST_PATCH_END_STAG', ipe, istatus)
CALL get_dom_ti_integer(nid,io_form,'SOUTH-NORTH_PATCH_START_UNSTAG',jps_u, istatus)
CALL get_dom_ti_integer(nid,io_form,'SOUTH-NORTH_PATCH_END_UNSTAG', jpe_u, istatus)
CALL get_dom_ti_integer(nid,io_form,'SOUTH-NORTH_PATCH_START_STAG', jps, istatus)
CALL get_dom_ti_integer(nid,io_form,'SOUTH-NORTH_PATCH_END_STAG', jpe, istatus)
CALL get_dom_ti_integer(nid,io_form,'BOTTOM-TOP_PATCH_START_UNSTAG', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'BOTTOM-TOP_PATCH_END_UNSTAG', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'BOTTOM-TOP_PATCH_START_STAG', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'BOTTOM-TOP_PATCH_END_STAG', idump, istatus)
CALL get_dom_ti_real (nid,io_form,'DX',dx, istatus)
CALL get_dom_ti_real (nid,io_form,'DY',dy, istatus)
CALL get_dom_ti_real (nid,io_form,'DT',dt, istatus)
CALL get_dom_ti_real (nid,io_form,'CEN_LAT', ctrlat, istatus)
CALL get_dom_ti_real (nid,io_form,'CEN_LON', ctrlon, istatus)
CALL get_dom_ti_real (nid,io_form,'TRUELAT1', trlat1, istatus)
CALL get_dom_ti_real (nid,io_form,'TRUELAT2', trlat2, istatus)
CALL get_dom_ti_real (nid,io_form,'MOAD_CEN_LAT', rdump, istatus)
CALL get_dom_ti_real (nid,io_form,'STAND_LON', trlon, istatus)
CALL get_dom_ti_integer(nid,io_form,'MAP_PROJ', iproj, istatus)
CALL get_dom_ti_char (nid,io_form,'MMINLU', cdump, istatus)
CALL get_dom_ti_integer(nid,io_form,'ISWATER', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'ISICE', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'ISURBAN', idump, istatus)
CALL get_dom_ti_integer(nid,io_form,'ISOILWATER', idump, istatus)
!-----------------------------------------------------------------------
!
! Do some dimension checks, We know mp_opt >0 and it is in multifile mode
!
!-----------------------------------------------------------------------
IF (dim_check) THEN
ilocd = (nx_ext-1)/nproc_x
jlocd = (ny_ext-1)/nproc_y
ilocs = ilocd*(loc_x-1)+1 ! Patch start for both stag and unstag
jlocs = jlocd*(loc_y-1)+1
! iloce = ilocd*loc_x ! Patch end for unstag
! jloce = jlocd*loc_y ! not sure because of readjoin == 1
IF (ilocs /= ips_u .OR. ilocs /= ips) THEN ! We are only sure about
! for the patch start index
WRITE(0,'(1x,2a,I4.4,a,/,3(7x,a,I4,a,/))') &
'ERROR: Patch size in X direction is not correct in ', &
'processor ',myproc,'.', &
' Expecting patch started from ',ilocs, ',', &
' Found unstag points started at ',ips_u, ',', &
' and stag points started at ',ips, '.'
CALL arpsstop('Wrong size in split files.',1)
END IF
IF (jlocs /= jps_u .OR. jlocs /= jps) THEN
WRITE(0,'(1x,2a,I4.4,a,/,3(7x,a,I4,a,/))') &
'ERROR: Patch size in Y direction is not correct in ', &
' processor ', myproc,'.', &
' Expecting patch started from ',jlocs, ',', &
' Found unstag points started at ',jps_u, ',', &
' and stag points started at ',jps, '.'
CALL arpsstop('Wrong size in split files.',1)
END IF
END IF
!-----------------------------------------------------------------------
!
! Determine soil layers from surface physics option
!
!-----------------------------------------------------------------------
IF (sfcphys == 1) THEN
nzsoil_ext = 5
ELSE IF (sfcphys == 2) THEN
nzsoil_ext = 4
ELSE IF (sfcphys == 3) THEN
nzsoil_ext = 6
ELSE
WRITE(6,*) '=============================================='
WRITE(6,*) 'WARNING: unknown sf_surface_physics = ',sfcphys
WRITE(6,*) '=============================================='
nzsoil_ext = 5
END IF
nzsoil_ext = nzsoil_ext + 1 ! Use surface as an extra soil layer
RETURN
END SUBROUTINE get_wrf_meta_from_multi_files
SUBROUTINE get_dom_ti_integer(nid,io_form,element, val, ireturn) 31,6
!
!-----------------------------------------------------------------------
!
! NOTE: do not have to broadcast because we are sure it is in
! MPI multifile mode.
!
!-----------------------------------------------------------------------
!
IMPLICIT NONE
INTEGER, INTENT(IN) :: nid
INTEGER, INTENT(IN) :: io_form
CHARACTER(*), INTENT(IN) :: element
INTEGER, INTENT(OUT) :: val
INTEGER, INTENT(OUT) :: ireturn
INTEGER :: outcount
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Begin of executable code
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF (io_form == 7) THEN
CALL get_ncd_dom_ti_integer(nid,element,val,ireturn)
ELSE IF (io_form == 1) THEN
CALL ext_int_get_dom_ti_integer(nid,element,val,1,outcount,ireturn)
END IF
RETURN
END SUBROUTINE get_dom_ti_integer
SUBROUTINE get_dom_ti_real(nid,io_form,element, val, ireturn) 11
IMPLICIT NONE
INTEGER, INTENT(IN) :: nid
INTEGER, INTENT(IN) :: io_form
CHARACTER(*), INTENT(IN) :: element
REAL, INTENT(OUT) :: val
INTEGER, INTENT(OUT) :: ireturn
INTEGER :: outcount
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Begin of executable code
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF (io_form == 7) THEN
CALL get_ncd_dom_ti_real(nid,element,val,ireturn)
ELSE IF (io_form == 1) THEN
CALL ext_int_get_dom_ti_real(nid,element,val,1, outcount,ireturn)
END IF
RETURN
END SUBROUTINE get_dom_ti_real
!
SUBROUTINE get_dom_ti_char(nid,io_form,element, val, ireturn) 4
IMPLICIT NONE
INTEGER, INTENT(IN) :: nid
INTEGER, INTENT(IN) :: io_form
CHARACTER(*), INTENT(IN) :: element
CHARACTER(*), INTENT(OUT) :: val
INTEGER, INTENT(OUT) :: ireturn
INTEGER :: outcount
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Begin of executable code
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF (io_form == 7) THEN
CALL get_ncd_dom_ti_char(nid,element,val,ireturn)
ELSE IF (io_form == 1) THEN
CALL ext_int_get_dom_ti_char(nid,element,val,ireturn)
END IF
RETURN
END SUBROUTINE get_dom_ti_char
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE get_wrf_dummy ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE get_wrf_dummy_from_multi_files(nid,io_form, &,1
ncompressx,ncompressy,datestr,itime, &
varname,varType,memoryorder,stagger, &
dimname1,dimname2,dimname3,nx,ny,nz,nxd,nyd,nzd,temtd, &
istatus)
!-----------------------------------------------------------------------
!
! PURPOSE:
! Read in an array from the WRF history file. It is just for sequential
! access of WRF binary file
!
!-----------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: io_form
INTEGER, INTENT(IN) :: ncompressx,ncompressy
INTEGER, INTENT(IN) :: nid(ncompressx,ncompressy)
CHARACTER(LEN=*), INTENT(IN) :: datestr
INTEGER, INTENT(IN) :: itime
CHARACTER(LEN=*), INTENT(IN) :: varname
INTEGER, INTENT(IN) :: varType
CHARACTER(LEN=*), INTENT(IN) :: MemoryOrder
CHARACTER(LEN=*), INTENT(IN) :: stagger
CHARACTER(LEN=*), INTENT(IN) :: dimname1
CHARACTER(LEN=*), INTENT(IN) :: dimname2
CHARACTER(LEN=*), INTENT(IN) :: dimname3
INTEGER, INTENT(IN) :: nx ! ARPS patch size
INTEGER, INTENT(IN) :: ny
INTEGER, INTENT(IN) :: nz
INTEGER, INTENT(IN) :: nxd,nyd,nzd ! WRF data size
REAL, INTENT(OUT) :: temtd(nxd*nyd*nzd) ! data in files
INTEGER, INTENT(OUT) :: istatus
!-----------------------------------------------------------------------
!
! Misc. Local variables
!
!-----------------------------------------------------------------------
INTEGER, PARAMETER :: VAR_NOTEXIST = -1
INTEGER, PARAMETER :: WRF_REAL = 104
INTEGER, PARAMETER :: WRF_INTEGER = 106
CHARACTER(80) :: DimNames(3)
INTEGER :: DomainStart(3), DomainEnd(3)
INTEGER :: MemoryStart(3), MemoryEnd(3)
INTEGER :: PatchStart(3), PatchEnd(3)
INTEGER :: xdim, ydim, zdim
INTEGER :: nxlg, nylg
INTEGER :: ilocs,iloce,jlocs,jloce
LOGICAL :: patched
INTEGER :: iloc, jloc
INTEGER :: nxt, nyt ! WRF title size
! it should be nxd,nyd except at boundary
INCLUDE 'mp.inc'
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
! IF ( io_form /= 1 ) RETURN
nxlg = (nx-1)*nproc_x ! domain size
nylg = (ny-1)*nproc_y
IF (stagger == 'X') nxlg = nxlg + 1
IF (stagger == 'Y') nylg = nylg + 1
IF (MemoryOrder == 'XZY') THEN
xdim = 1
ydim = 3
zdim = 2
Patched = .TRUE.
ELSE IF (MemoryOrder == 'XY' .OR. MemoryOrder == 'XYZ') THEN
xdim = 1
ydim = 2
zdim = 3
Patched = .TRUE.
ELSE
xdim = 1
ydim = 2
zdim = 3
nxlg = nxd ! 1D arrays, used pass-in instead of domain index
nylg = nyd
Patched = .False.
END IF
DimNames(xdim) = dimname1
DimNames(ydim) = dimname2
DimNames(zdim) = dimname3
DomainStart(:) = 1
DomainEnd(xdim) = nxlg
DomainEnd(ydim) = nylg
DomainEnd(zdim) = nzd
IF(myproc == 0) &
WRITE(6,FMT='(2a)',ADVANCE='NO') ' Reading dump variable ', varname
PatchStart(:) = DomainStart(:)
PatchEnd(:) = DomainEnd(:)
MemoryStart(:) = DomainStart(:)
MemoryEnd(:) = DomainEnd(:)
ilocs = (nx-1)*(loc_x-1)+1 ! ARPS patch start
jlocs = (ny-1)*(loc_y-1)+1
IF (patched) THEN
nxt = (nx-1)/ncompressx ! WRF tile size
nyt = (ny-1)/ncompressy
!-----------------------------------------------------------------------
! Do some check, should be commented out before releasing.
!-----------------------------------------------------------------------
IF (nxt /= nxd .AND. nxt /= nxd-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nxd = ',nxd,', nxt = ',nxt
END IF
IF (nyt /= nyd .AND. nyt /= nyd-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nyd = ',nyd,', nyt = ',nyt
END IF
END IF ! patched
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
IF ( patched ) THEN ! 2D or 3D arrays
PatchStart(xdim) = ilocs + nxt*(iloc-1) ! WRF patch
PatchStart(ydim) = jlocs + nyt*(jloc-1)
PatchEnd(xdim) = ilocs + nxt*iloc - 1
PatchEnd(ydim) = jlocs + nyt*jloc - 1
IF (stagger == 'X' .AND. loc_x == nproc_x .AND. &
iloc == ncompressx) THEN ! last staggered WRF patch
PatchEnd(xdim) = PatchEnd(xdim)+1
END IF
IF (stagger == 'Y' .AND. loc_y == nproc_y .AND. &
jloc == ncompressy) THEN ! last staggered WRF patch
PatchEnd(ydim) = PatchEnd(ydim)+1
END IF
PatchStart(zdim) = 1
PatchEnd(zdim) = nzd
MemoryStart(:) = PatchStart(:)
MemoryEnd(:) = PatchEnd(:)
END IF
CALL ext_int_read_field(nid(iloc,jloc), DateStr, VarName, temtd, &
varType, 0, 0, 1, MemoryOrder, Stagger, DimNames, &
DomainStart, DomainEnd, &
MemoryStart, MemoryEnd, & ! Memory
PatchStart, PatchEnd, & ! Patch
iStatus)
END DO
END DO
IF(myproc == 0) WRITE(6,'(a)') ' ... DONE.'
RETURN
END SUBROUTINE get_wrf_dummy_from_multi_files
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE get_wrf_1d ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE get_wrf_1d_from_multi_files(nfid,io_form,ncompressx,ncompressy, &,2
datestr,itime,varname,stagger, &
dimname1,nz,var1d,nzd,istatus)
!-----------------------------------------------------------------------
!
! PURPOSE:
! Read in a 1D array from the WRF history file
!
!-----------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: io_form
INTEGER, INTENT(IN) :: ncompressx, ncompressy
INTEGER, INTENT(IN) :: nfid(ncompressx,ncompressy)
CHARACTER(LEN=*), INTENT(IN) :: datestr
INTEGER, INTENT(IN) :: itime
CHARACTER(LEN=*), INTENT(IN) :: varname
CHARACTER(LEN=*), INTENT(IN) :: stagger
CHARACTER(LEN=*), INTENT(IN) :: dimname1
INTEGER, INTENT(IN) :: nz ! memory index
REAL, INTENT(OUT) :: var1d(nz)
INTEGER, INTENT(IN) :: nzd ! data index
INTEGER, INTENT(OUT) :: istatus
!-----------------------------------------------------------------------
!
! Misc. Local variables
!
!-----------------------------------------------------------------------
INTEGER, PARAMETER :: VAR_NOTEXIST = -1
INTEGER, PARAMETER :: WRF_REAL = 104
INTEGER, PARAMETER :: WRF_INTEGER = 106
INCLUDE 'mp.inc'
CHARACTER(80) :: DimNames(3)
INTEGER :: DomainStart(3), DomainEnd(3)
INTEGER :: MemoryStart(3), MemoryEnd(3)
INTEGER :: PatchStart(3), PatchEnd(3)
INTEGER :: iloc, jloc
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF ( myproc == 0 ) &
WRITE(6,FMT='(2a)',ADVANCE='NO') ' Reading 1D variable ', varname
IF (io_form == 7) THEN ! NetCDF format
CALL get_ncd_1d(nfid(1,1),itime,varname,nzd,var1d,istatus)
ELSE IF (io_form == 1) THEN
DimNames(1) = dimname1
DimNames(2:3) = ''
DomainStart(1:3) = 1
DomainEnd(2:3) = 1
DomainEnd(1) = nzd
MemoryStart(1:3) = 1
MemoryEnd(2:3) = 1
MemoryEnd(1) = nz
PatchStart(1:3) = 1
PatchEnd(2:3) = 1
PatchEnd(1) = nzd
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
CALL ext_int_read_field(nfid(iloc,jloc), DateStr, VarName, &
var1d, WRF_REAL,0, 0, 1, 'Z ', Stagger, DimNames, &
DomainStart, DomainEnd, &
MemoryStart, MemoryEnd, & ! Memory
PatchStart, PatchEnd, & ! Patch
iStatus)
END DO
END DO
ELSE
WRITE(0,*) 'ERROR: unsupported io_form = ',io_form
END IF
IF ( myproc == 0 ) WRITE(6,'(a)') ' ... DONE.'
RETURN
END SUBROUTINE get_wrf_1d_from_multi_files
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE get_wrf_2d ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE get_wrf_2d_from_multi_files(nfid,io_form,ncompressx,ncompressy, &,3
datestr,itime,fzone,varname,stagger, &
dimname1,dimname2,nx,ny,var2d, &
nxdin,nydin,temtd,istatus)
!-----------------------------------------------------------------------
!
! PURPOSE:
! Read in a 2D array from the WRF history file
!
!-----------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: io_form
INTEGER, INTENT(IN) :: ncompressx, ncompressy
INTEGER, INTENT(IN) :: nfid(ncompressx,ncompressy)
CHARACTER(LEN=*), INTENT(IN) :: datestr
INTEGER, INTENT(IN) :: itime
INTEGER, INTENT(IN) :: fzone
CHARACTER(LEN=*), INTENT(IN) :: varname
CHARACTER(LEN=*), INTENT(IN) :: stagger
CHARACTER(LEN=*), INTENT(IN) :: dimname1
CHARACTER(LEN=*), INTENT(IN) :: dimname2
INTEGER, INTENT(IN) :: nx ! ARPS patch size
INTEGER, INTENT(IN) :: ny
REAL, INTENT(OUT) :: var2d(nx,ny)
INTEGER, INTENT(IN) :: nxdin,nydin ! Data patch size
REAL, INTENT(OUT) :: temtd(nxdin*nydin) ! data array
INTEGER, INTENT(OUT) :: istatus
!-----------------------------------------------------------------------
!
! Misc. Local variables
!
!-----------------------------------------------------------------------
INTEGER, PARAMETER :: VAR_NOTEXIST = -1
INTEGER, PARAMETER :: WRF_REAL = 104
INTEGER, PARAMETER :: WRF_INTEGER = 106
INCLUDE 'mp.inc'
INTEGER :: i, j
CHARACTER(80) :: DimNames(3)
INTEGER :: DomainStart(3), DomainEnd(3)
INTEGER :: MemoryStart(3), MemoryEnd(3)
INTEGER :: PatchStart(3), PatchEnd(3)
INTEGER :: ilocs,iloce,jlocs,jloce
INTEGER :: iloc, jloc ! Processor index
!-----------------------------------------------------------------------
!
! Dimensions:
!
! nxdim, nydim -- Whole domain size, stagger or unstagger
! nx, ny -- ARPS patch stagger size, (IN)
! nxp, nyp -- ARPS patch size contains acutal data from WRF files
! nxdin, nydin -- WRF data patch size, stagger (IN)
! nxt, nyt -- WRF data patch size, unstagger
! nxd, nyd -- WRF actual data size in files, stagger or unstagger
!
!-----------------------------------------------------------------------
INTEGER :: nxdim, nydim
INTEGER :: nxt, nyt ! unstagger WRF patch size
INTEGER :: nxd, nyd ! WRF data patch size
! maybe stagger or unstagger
INTEGER :: nxp, nyp
INTEGER :: ia, ja, kin
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF ( myproc == 0 ) &
WRITE(6,FMT='(2a)',ADVANCE='NO') ' Reading 2D variable ', varname
nxdim = (nx-1)*nproc_x ! domain size
nydim = (ny-1)*nproc_y
IF (Stagger == 'X') nxdim = nxdim + 1
IF (Stagger == 'Y') nydim = nydim + 1
nxp = nx-1 ! ARPS patch size
nyp = ny-1
IF (Stagger == 'X' .AND. loc_x == nproc_x) nxp = nxp+1
IF (Stagger == 'Y' .AND. loc_y == nproc_y) nyp = nyp+1
nxt = (nx-1)/ncompressx ! WRF patch size
nyt = (ny-1)/ncompressy
!-----------------------------------------------------------------------
! Do some check, should be commented out before releasing.
!-----------------------------------------------------------------------
IF (nxt /= nxdin .AND. nxt /= nxdin-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nxdin = ',nxdin,', nxt = ',nxt
END IF
IF (nyt /= nydin .AND. nyt /= nydin-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nydin = ',nydin,', nyt = ',nyt
END IF
DimNames(1) = dimname1
DimNames(2) = dimname2
DimNames(3) = ''
DomainStart(1) = 1
DomainStart(2) = 1
DomainStart(3) = 1
DomainEnd(1) = nxdim
DomainEnd(2) = nydim
DomainEnd(3) = 1
PatchStart(3) = 1 ! because it is 2D data
PatchEnd(3) = 1
ilocs = (nx-fzone)*(loc_x-1)+fzone ! ARPS patch starts
jlocs = (ny-fzone)*(loc_y-1)+fzone
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
nxd = nxt
nyd = nyt
IF (stagger == 'X' .AND. loc_x == nproc_x .AND. &
iloc == ncompressx) nxd = nxt+1
IF (stagger == 'Y' .AND. loc_y == nproc_y .AND. &
jloc == ncompressy) nyd = nyt+1
PatchStart(1) = ilocs + (iloc-1)*nxt
PatchStart(2) = jlocs + (jloc-1)*nyt
PatchEnd(1) = PatchStart(1) + nxd - 1
PatchEnd(2) = PatchStart(2) + nyd - 1
MemoryStart(:) = PatchStart(:)
MemoryEnd(:) = PatchEnd(:)
IF (io_form == 7) THEN ! NetCDF format
CALL get_ncd_2d(nfid(iloc,jloc),itime,varname,nxd,nyd,temtd,istatus)
ELSE IF (io_form == 1) THEN
CALL ext_int_read_field(nfid(iloc,jloc),DateStr,VarName,temtd, &
WRF_REAL,0, 0, 1, 'XY', Stagger, DimNames, &
DomainStart, DomainEnd, &
MemoryStart, MemoryEnd, & ! Memory
PatchStart, PatchEnd, & ! Patch
iStatus)
ELSE
WRITE(0,*) 'ERROR: unsupported io_form = ',io_form
END IF
DO j = 1,nyd ! join WRF patches into ARPS patch
DO i = 1,nxd
kin = i + (j-1)*nxd
ia = PatchStart(1) - ilocs + i
ja = PatchStart(2) - jlocs + j
var2d(ia,ja) = temtd(kin)
END DO
END DO
END DO
END DO
CALL edgfill(var2d,1,nx,1,nxp,1,ny,1,nyp,1,1,1,1)
IF ( myproc == 0 ) WRITE(6,'(a)') ' ... DONE.'
RETURN
END SUBROUTINE get_wrf_2d_from_multi_files
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE get_wrf_2di ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE get_wrf_2di_from_multi_files(nfid,io_form,ncompressx,ncompressy, &,3
datestr,itime,fzone,varname,stagger, &
dimname1,dimname2,nx,ny,var2di,nxdin,nydin,temtd, &
istatus)
!-----------------------------------------------------------------------
!
! PURPOSE:
! Read in a 2D integer array from the WRF history file
!
!-----------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: io_form
INTEGER, INTENT(IN) :: ncompressx, ncompressy
INTEGER, INTENT(IN) :: nfid(ncompressx,ncompressy)
CHARACTER(LEN=*), INTENT(IN) :: datestr
INTEGER, INTENT(IN) :: itime
INTEGER, INTENT(IN) :: fzone
CHARACTER(LEN=*), INTENT(IN) :: varname
CHARACTER(LEN=*), INTENT(IN) :: stagger
CHARACTER(LEN=*), INTENT(IN) :: dimname1
CHARACTER(LEN=*), INTENT(IN) :: dimname2
INTEGER, INTENT(IN) :: nx ! local index
INTEGER, INTENT(IN) :: ny
INTEGER, INTENT(OUT) :: var2di(nx,ny)
INTEGER, INTENT(IN) :: nxdin,nydin ! WRF tiles size,
! large enough for stagger arrays
INTEGER, INTENT(OUT) :: temtd(nxdin*nydin) ! memory array
INTEGER, INTENT(OUT) :: istatus
!-----------------------------------------------------------------------
!
! Misc. Local variables
!
!-----------------------------------------------------------------------
INTEGER, PARAMETER :: VAR_NOTEXIST = -1
INTEGER, PARAMETER :: WRF_REAL = 104
INTEGER, PARAMETER :: WRF_INTEGER = 106
INCLUDE 'mp.inc'
INTEGER :: i, j
CHARACTER(80) :: DimNames(3)
INTEGER :: DomainStart(3), DomainEnd(3)
INTEGER :: MemoryStart(3), MemoryEnd(3)
INTEGER :: PatchStart(3), PatchEnd(3)
INTEGER :: ilocs,iloce,jlocs,jloce
!-----------------------------------------------------------------------
!
! Dimensions:
!
! nxdim, nydim -- Whole domain size, stagger or unstagger
! nx, ny -- ARPS patch stagger size, (IN)
! nxp, nyp -- ARPS patch size contains acutal data from WRF files
! nxdin, nydin -- WRF data patch size, stagger (IN)
! nxt, nyt -- WRF data patch size, unstagger
! nxd, nyd -- WRF actual data size in files, stagger or unstagger
!
!-----------------------------------------------------------------------
INTEGER :: nxdim, nydim
INTEGER :: nxt, nyt ! unstagger WRF patch size
INTEGER :: nxd, nyd ! WRF data patch size
! maybe stagger or unstagger
INTEGER :: nxp, nyp
INTEGER :: iloc, jloc
INTEGER :: ia, ja, kin
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF ( myproc == 0 ) &
WRITE(6,FMT='(2a)',ADVANCE='NO') ' Reading 2D integer variable ', varname
nxdim = (nx - 1)*nproc_x ! domain size
nydim = (ny - 1)*nproc_y
IF (Stagger == 'X') nxdim = nxdim + 1
IF (Stagger == 'Y') nydim = nydim + 1
nxp = nx-1 ! ARPS patch size
nyp = ny-1
IF (Stagger == 'X' .AND. loc_x == nproc_x) nxp = nxp+1
IF (Stagger == 'Y' .AND. loc_y == nproc_y) nyp = nyp+1
nxt = (nx-1)/ncompressx ! WRF patch size
nyt = (ny-1)/ncompressy
!-----------------------------------------------------------------------
! Do some check, should be commented out before releasing.
!-----------------------------------------------------------------------
IF (nxt /= nxdin .AND. nxt /= nxdin-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nxdin = ',nxdin,', nxt = ',nxt
END IF
IF (nyt /= nydin .AND. nyt /= nydin-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nydin = ',nydin,', nyt = ',nyt
END IF
DimNames(1) = dimname1
DimNames(2) = dimname2
DimNames(3) = ''
DomainStart(1) = 1
DomainStart(2) = 1
DomainStart(3) = 1
DomainEnd(1) = nxdim
DomainEnd(2) = nydim
DomainEnd(3) = 1
PatchStart(3) = 1 ! because it is 2D data
PatchEnd(3) = 1
ilocs = (nx-fzone)*(loc_x-1)+fzone ! ARPS patch starts
jlocs = (ny-fzone)*(loc_y-1)+fzone
DO jloc = 1, ncompressy
DO iloc = 1, ncompressx
nxd = nxt
nyd = nyt
IF (stagger == 'X' .AND. loc_x == nproc_x .AND. &
iloc == ncompressx) nxd = nxt+1
IF (stagger == 'Y' .AND. loc_y == nproc_y .AND. &
jloc == ncompressy) nyd = nyt+1
PatchStart(1) = ilocs + (iloc-1)*nxt
PatchStart(2) = jlocs + (jloc-1)*nyt
PatchEnd(1) = PatchStart(1) + nxd - 1
PatchEnd(2) = PatchStart(2) + nyd - 1
MemoryStart(:) = PatchStart(:)
MemoryEnd(:) = PatchEnd(:)
IF (io_form == 7) THEN ! NetCDF format
CALL get_ncd_2di(nfid(iloc,jloc),itime,varname,nxd,nyd,temtd,istatus)
ELSE IF (io_form == 1) THEN
CALL ext_int_read_field(nfid(iloc,jloc), DateStr, VarName, &
temtd,WRF_INTEGER,0, 0, 1,'XY',Stagger,DimNames, &
DomainStart, DomainEnd, &
MemoryStart, MemoryEnd, & ! Memory
PatchStart, PatchEnd, & ! Patch
iStatus)
ELSE
WRITE(0,*) 'ERROR: unsupported io_form = ',io_form
END IF
DO j = 1,nyd
DO i = 1,nxd
kin = i + (j-1)*nxd
ia = PatchStart(1) - ilocs + i
ja = PatchStart(2) - jlocs + j
var2di(ia,ja) = temtd(kin)
END DO
END DO
END DO
END DO
CALL iedgfill(var2di,1,nx,1,nxp,1,ny,1,nyp,1,1,1,1)
IF ( myproc == 0 ) WRITE(6,'(a)') ' ... DONE.'
RETURN
END SUBROUTINE get_wrf_2di_from_multi_files
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE get_wrf_3d ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE get_wrf_3d_from_multi_files(nfid,io_form,ncompressx,ncompressy, &,3
datestr,itime,fzone,varname,stagger, &
dimname1,dimname2,dimname3,nx,ny,nz,var3d, &
nxdin,nydin,nzd,temtd,istatus)
!-----------------------------------------------------------------------
!
! PURPOSE:
! Read in a 3D array from the WRF NetCDF file
!
!-----------------------------------------------------------------------
IMPLICIT NONE
INTEGER, INTENT(IN) :: io_form
INTEGER, INTENT(IN) :: ncompressx,ncompressy
INTEGER, INTENT(IN) :: nfid(ncompressx,ncompressy)
CHARACTER(LEN=*), INTENT(IN) :: datestr
INTEGER, INTENT(IN) :: itime
INTEGER, INTENT(IN) :: fzone
CHARACTER(LEN=*), INTENT(IN) :: varname
CHARACTER(LEN=*), INTENT(IN) :: stagger
CHARACTER(LEN=*), INTENT(IN) :: dimname1
CHARACTER(LEN=*), INTENT(IN) :: dimname2
CHARACTER(LEN=*), INTENT(IN) :: dimname3
INTEGER, INTENT(IN) :: nx ! local index
INTEGER, INTENT(IN) :: ny
INTEGER, INTENT(IN) :: nz
REAL, INTENT(OUT) :: var3d(nx,ny,nz)
INTEGER, INTENT(IN) :: nxdin,nydin,nzd ! Data index
REAL, INTENT(OUT) :: temtd(nxdin*nydin*nzd) ! domain array
INTEGER, INTENT(OUT) :: istatus
!-----------------------------------------------------------------------
!
! Misc. Local variables
!
!-----------------------------------------------------------------------
INTEGER, PARAMETER :: VAR_NOTEXIST = -1
INTEGER, PARAMETER :: WRF_REAL = 104
INTEGER, PARAMETER :: WRF_INTEGER = 106
INCLUDE 'mp.inc'
INTEGER :: i, j, k
INTEGER :: i1,j1,k1
CHARACTER(80) :: DimNames(3)
INTEGER :: DomainStart(3), DomainEnd(3)
INTEGER :: MemoryStart(3), MemoryEnd(3)
INTEGER :: PatchStart(3), PatchEnd(3)
INTEGER :: ilocs,iloce,jlocs,jloce
!-----------------------------------------------------------------------
!
! Dimensions:
!
! nxdim, nydim -- Whole domain size, stagger or unstagger
! nx, ny -- ARPS patch stagger size, (IN)
! nxp, nyp -- ARPS patch size contains acutal data from WRF files
! nxdin, nydin -- WRF data patch size, stagger (IN)
! nxt, nyt -- WRF data patch size, unstagger
! nxd, nyd -- WRF actual data size in files, stagger or unstagger
!
!-----------------------------------------------------------------------
INTEGER :: nxdim, nydim
INTEGER :: nxt, nyt ! unstagger WRF patch size
INTEGER :: nxd, nyd ! WRF data patch size
! maybe stagger or unstagger
INTEGER :: nxp, nyp
INTEGER :: iloc, jloc
INTEGER :: ia, ja, kin
INTEGER :: ilocs_t, jlocs_t
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IF ( myproc == 0 ) &
WRITE(6,FMT='(2a)',ADVANCE='NO') ' Reading 3D variable ', varname
nxdim = (nx - 1)*nproc_x ! domain size
nydim = (ny - 1)*nproc_y
IF (Stagger == 'X') nxdim = nxdim + 1
IF (Stagger == 'Y') nydim = nydim + 1
nxp = nx-1 ! ARPS patch size
nyp = ny-1
IF (Stagger == 'X' .AND. loc_x == nproc_x) nxp = nxp+1
IF (Stagger == 'Y' .AND. loc_y == nproc_y) nyp = nyp+1
nxt = (nx-1)/ncompressx ! WRF patch size
nyt = (ny-1)/ncompressy
!-----------------------------------------------------------------------
! Do some check, should be commented out before releasing.
!-----------------------------------------------------------------------
IF (nxt /= nxdin .AND. nxt /= nxdin-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nxdin = ',nxdin,', nxt = ',nxt
END IF
IF (nyt /= nydin .AND. nyt /= nydin-1) THEN
WRITE(6,*) 'Wrong in WRF patch size, nydin = ',nydin,', nyt = ',nyt
END IF
ilocs = (nx-fzone)*(loc_x-1)+fzone
jlocs = (ny-fzone)*(loc_y-1)+fzone
DO jloc = 1,ncompressy
DO iloc = 1,ncompressx
nxd = nxt
nyd = nyt
IF (stagger == 'X' .AND. loc_x == nproc_x .AND. &
iloc == ncompressx) nxd = nxt+1
IF (stagger == 'Y' .AND. loc_y == nproc_y .AND. &
jloc == ncompressy) nyd = nyt+1
ilocs_t = (iloc-1)*nxt ! WRF tile start index within ARPS patch
jlocs_t = (jloc-1)*nyt
IF (io_form == 7) THEN
CALL get_ncd_3d(nfid(iloc,jloc),itime,varname,nxd,nyd,nzd,temtd,istatus)
DO k = 1,nzd
k1 = (k-1)*nxd*nyd
DO j = 1,nyd
j1 = (j-1)*nxd
DO i = 1,nxd
kin = i + j1 + k1
ia = ilocs_t + i
ja = jlocs_t + j
var3d(ia,ja,k) = temtd(kin)
END DO
END DO
END DO
ELSE IF (io_form == 1) THEN
DimNames(1) = dimname1
DimNames(2) = dimname3
DimNames(3) = dimname2
DomainStart(1) = 1
DomainStart(2) = 1
DomainStart(3) = 1
DomainEnd(1) = nxdim
DomainEnd(2) = nzd
DomainEnd(3) = nydim
PatchStart(1) = ilocs + ilocs_t
PatchEnd(1) = PatchStart(1) + nxd - 1
PatchStart(3) = jlocs + jlocs_t
PatchEnd(3) = PatchStart(3) + nyd - 1
PatchStart(2) = 1
PatchEnd(2) = nzd
MemoryStart(:) = PatchStart(:)
MemoryEnd(:) = PatchEnd(:)
CALL ext_int_read_field(nfid(iloc,jloc), DateStr, VarName, &
temtd, WRF_REAL,0, 0, 1, 'XZY', Stagger, DimNames, &
DomainStart, DomainEnd, &
MemoryStart, MemoryEnd, & ! Memory
PatchStart, PatchEnd, & ! Patch
iStatus)
DO k = 1,nzd
k1 = (k-1)*nxd
DO j = 1,nyd
j1 = (j-1)*nxd*nzd
DO i = 1,nxd
kin = i + j1 + k1
ia = ilocs_t + i
ja = jlocs_t + j
var3d(ia,ja,k) = temtd(kin)
END DO
END DO
END DO
ELSE
WRITE(0,*) 'ERROR: unsupported io_form = ',io_form
END IF
END DO ! iloc
END DO ! jloc
CALL edgfill(var3d,1,nx,1,nxp,1,ny,1,nyp,1,nz,1,nzd)
IF ( myproc == 0 ) WRITE(6,'(a)') ' ... DONE.'
RETURN
END SUBROUTINE get_wrf_3d_from_multi_files